System Solutions for Compressed Bales
Bale Dewirer with Bale Breaker
With this system, you can both dewire the tightly compressed bales and loosen them for subsequent treatment. It is therefore an pre-processing for a wide range of plant processes.
Sorting System with One Processing Line
With this sorting system, you can separate the material from bales into recyclable fractions. Separate valuable metals or secure high-calorific materials for substitute fuel production. Depending on the material, we recommend using a dewiring machine or a shredder to open the bales beforehand.
Sorting System with One Processing Line and NIR Sorting
With this sorting system, you can separate the material from pressed bales into recyclable fractions. A NIR sorter enables you to precisely separate out even small plastic particles. You can also remove valuable metals. Depending on the material, we recommend using a dewiring machine or a shredder to open the bales beforehand.
Sorting System with Two Processing Lines and NIR Sorting
With this sorting system, you can separate a particularly large amount of material from pressed bales into recyclable fractions. A NIR sorter enables you to precisely sort out even small plastic particles. You can also remove valuable metals. Depending on the material, we recommend using a dewiring machine or a shredder to open the bales beforehand.
Processing into Refuse Derived Fuel
With this processing line consisting of a pre-shredder, a screening drum, an arch belt separator and a post-shredder, you can produce valuable substitute fuel for industrial use from your material. Depending on the material, we recommend using a dewiring machine or a shredder to open the bales beforehand.
Processing into Refuse Derived Fuel
With this processing line consisting of a pre-shredder, a screening drum, an arch belt separator and two post-shredders, you can produce even larger quantities of valuable substitute fuel for industrial use from your material. Depending on the material, we recommend using a dewiring machine or a shredder to open the bales beforehand.
Do you need a different concept for a plant?
These are our standardised systems.
We would be happy to create a customised solution for you.
Wired and Compressed Bales
After initial treatment, many materials are pressed into bales and tightly wrapped with wire. This saves space both during transport and interim storage and simplifies logistics immensely. However, the bales must be properly opened again before further treatment. The wire is under such tension that opening it by hand is not only time-consuming but also dangerous. In addition, the material must be loosened up again, as it can no longer be processed properly by pressing. With our system solution consisting specifically of a dewirer and bale breaker, we offer you the start to efficient further processing.
Looking for the right solution?
We will be happy to advise you!
Variable System Layout
The illustrations of our system solutions are examples. The layout of the system components can be adapted and rearranged accordingly. By using modern 3D scanners, we can also create detailed replicas of existing buildings and thus design a perfect concept for your demands.