Stationary Pre-Shredder FORUS SES 25
Shredder with two shafts for stationary shredding
You are a plant designer or operator for a treatment plant for household waste, bulky waste or commercial waste? You are looking for a reliable high-performance machine for pre-shredding and evening out the waste?
Or does the material you are processing consist of electronic scrap, foil or paper? Maybe you are operating a biological waste treatment plant and you need mechanical support for shredding scrap wood, shrub and hedge cuttings or other structural material. The stationary pre-shredder FORUS SES 25 is a universal shredder that adapts perfectly to all your requirements.
The stationary primary crusher FORUS SES 25 is equipped with an electrical drive. The drive as well as the electric control system are both incorporated into the machine frame which allows for a very compact and space-saving machine design.
The stationary pre-shredder is equipped with a hydraulically tiltable chute with 4 m³ filling capacity for easy infeed by wheel loader. The filling volume can be increased considerably with an additional extension.
The stationary shredder can be individually tailored to each customer’s needs. The shredding unit of the stationary shredder can be easily adapted to the material and the required final particle size. The tools for the two rotors, the planetary gears for the drive and the type of crushing beam can be freely selected for the multifunctional or disc grinder. Both rotors are independent from each other in their rotating direction and rotational speed.
The crushing beam can be exchanged with a special hydraulic device. The crushing beam is unlatched and moves down at the touch of a button where it can be exchanged for another crushing beam within minutes and then it is moved up again to below the rotors.
The machine is easily and comfortably operated with the touch panel of the electric control system. Even exchanging the rotors presents no difficulties at all with this machine.
The sturdy substructure of the stationary pre-shredder FORUS SES 25 is offered with a height of 500 mm and 1.300 mm. it is equipped with vertical H-beams, reinforcements and sole plates for fixation on the floor for elevation of the machine above an existing discharge conveyor belt.
Nikolas Kaufeisen
Brand Manager Shredding Technology
Stationary Machines
Fon +49 175 3285275
N.Kaufeisen(at)f-e.de
All Technical Data in section Downloads.
- 4 freely selectable shredding programs
- Hydraulically tiltable chute with filling volume of 4 m³
- Electro-hydraulic drive
- Complete with electric control system and monitoring of the relevant machine components by sensors
- Large doors for comfortable access to the shredding unit
Downloads
FORUS SES 25
Opening, Dosing & Sorting Systems
Contact
Contact us today and learn more about our all-rounder – the FORUS SES 25 Stationary Pre-Shredder.
Nikolas Kaufeisen
Brand Manager Shredding Technology
Stationary Machines
Fon +49 175 3285275
N.Kaufeisen(at)f-e.de
Steffen Simonsen
Area Sales Manager
BRT HARTNER | TEUTON
Stationary Machines
Fon +49 5451 50773-30
Cell +49 173 5319440
s.simonsen(at)f-e.de
Anselm Breitkopf
Executive Manager | After Sales Director
BRT HARTNER | TEUTON
Stationary Machines
Fon +49 800 EGGERSMANN
Fon +49 800 3443776
service(at)brt-hartner.com
You are looking for a mobile pre-shredder? Learn more about our FORUS SE 25.
Just as universal, however with even more power for heavy-duty operation: the TEUTON ZS 55 Stationary Universal Shredder. Take a look now!