PET Perforator BRT HARTNER PS / PD

For the Reduction of the Material Volume of PET Bottles and Other Hollow Bodies Made of Plastic

You are operating a sorting plant for lightweight packaging material from household-type waste collection? 

At the end of the treatment process you would like to press PET bottles and other hollow bodies made of plastic with a baling press or a compacting container? You are looking for a solution to optimally prepare the material for the pressing process? For example, letting air and liquids out of the lightweight packaging material? This important task can be handled by our PET-Perforators BRT HARTNER PS / PD!

The Perforator for PET material by BRT HARTNER is equipped with a rotating drum with sturdy knives, an electrical gear motor, a clamping flap (pressing mechanism) and a frame. The bottles and hollow bodies are grabbed and pulled into a gap between the clamping flap and the drum. The distance is reduced so the containers are not just punctured, but also compressed. Air and also liquids can escape. The bottles and containers are now reduced in volume and cannot roll any longer which facilitates material buffering and conveying. Collection hoppers can accommodate large material quantities. The conveyor belt is used more efficiently, so the baling press can be filled up faster. If required, a bar of counter-knives can be mounted to the clamping flap in order to enable the machine to also perforate very small bottles.

The knives of the Perforator are made of wear-resistant steel and can be re-sharpened. They are sturdy enough to also use the machine as a glass-crusher or for aluminum cans. Foreign or disruptive objects within the material are no problem either.

The PET Perforator can be embedded into a discharge chute of a manual sorting line or mounted above a mobile infeed belt to a baling press. Freestanding machines with infeed chutes and substructure can be realized as well. The Perforator is available in three different working widths and also as a double machine (Double Perforator BRT HARTNER PD).

With the Perforators PS / PD the material volume can be reduced by more than 30 %. The low investment costs as well as its long operational life additionally facilitate the decision! Give us a call today under the following phone number: +49 5451 50773-0.

Andre Berlage
Executive Manager

BRT HARTNER
Stationary Machines

Fon +49 5451 50773-31
Cell +49 160 90693161
a.berlage(at)f-e.de 

 

Throughput PS

40-80 m³/h

Throughput PD

80-160 m³/h

 

 

Number of trommels PS

1

Number of trommels PD

2

 

All Technical Data in section Downloads.

  • Application for PET bottles, plastic hollow bodies and aluminum cans
  • Modified design of the PET-Perforator as glass-crusher
  • Perforation rate > 95 %
  • Throughput up to 160 m³/h 
  • Applicable for bottles and containers of 0,5 liters up to 5 liters
  • Low drive power 
  • Low susceptibility for disruptive material
  • Low investment costs
  • Long lifespan
  • Tools are replaceable and can be re-sharpened
  • Reduction of material volume of more than 30 %
  • Especially suitable for retrofit
  • Optionally with electric control unit

Downloads

Opening, Dosing & Sorting Systems

Transform your Waste

Contact

You would like to optimize your plant processes and our Perforator for PET bottles is the system to assist you in this regard? We look forward to hearing from you:

Andre Berlage

Executive Manager
BRT HARTNER
Stationary Machines

Fon +49 5451 50773-31
Cell +49 160 90693161
a.berlage(at)f-e.de

Steffen Simonsen

Area Sales Manager
BRT HARTNER
Stationary Machines

Fon +49 5451 50773-30
Cell +49 173 5319440
s.simonsen(at)f-e.de

Detlev Rakemann

Area Sales Manager
BRT HARTNER
Stationary Machines

Fon +49 5451 50773-51
Cell +49 170 2200649
d.rakemann(at)f-e.de

You want to break open bales in your plant instead of pressing bales? No problem! Our Bale Breaker BRT HARTNER BB is waiting for you!

    Here you will find information about our complete product range of Opening, Dosing and Sorting Systems